The Ametek/Chatillon® LG Series mechanical force gauge is ideal for tensile or compression force measurement applications up to 100 lbf, 50 kgf or 500 N. This unidirectional force gauge has one end dedicated to tensile tests and the other dedicated to compressive tests. The gauge features a large 2-1/4-inch dial which rotates 360-degrees for taring. A peak hold button is easy to use- it holds the pointer at the peak load.

The LG Series has a force measurement accuracy of better than 0.5% full scale and included mechanical overload protection. The gauge is available in lbf, kgf and N units. The gauge comes with a Certificate of Calibration with NIST data, accessories and carrying case.

• Tensile Load (one direction dedicated to pull)
• Compression Load (one direction dedicated to push)
• Peak Tension or Compression Load (switch activated)

The Ametek/Chatillon® DG Series mechanical force gauge is ideal for tensile or compression force measurement applications up to 500 lbf, 250 kgf or 2500 N. This unidirectional force gauge has one end dedicated to tensile tests and the other dedicated to compressive tests. The gauge features a large 2-1/4-inch dial which rotates 360-degrees for taring. A peak hold button is easy to use- it holds the pointer at the peak load.

The DG Series has a force measurement accuracy of better than 0.5% full scale and included mechanical overload protection. The gauge is available in lbf, kgf and N units. The gauge comes with a Certificate of Calibration with NIST data, accessories and carrying case.

• Tensile Load (one direction dedicated to pull)
• Compression Load (one direction dedicated to push)
• Peak Tension or Compression Load (switch activated)

The Ametek/Chatillon® DFS Series offers the best price performance of any digital force gauge available today. This compact, easy-to-use force gauge is designed for basic and complex applications. Ideal for handheld or test stand applications, the DFS may be equipped with integral loadcells or smart remote sensors for load measurement and torque measurement. Measurement accuracy is better than 0.1% full scale. A large, easy-to-read, high resolution dot matrix LCD display supports a variety of standard gauge functions including normal and peak readings, high/low limits, setpoints, pass/fail results, statistical results, load averaging, load comparisons, % and sharp break detection, loadcell actuation and direction. Loads are displayed in ozf, gf, lbf, kgf and N units. The display can be inverted and displayed results may be “hidden” from the operator. The DFS gauge comes standard with RS-232 cable, carrying case, battery adapter/charger, testing accessories and NIST Certificate of Calibration with data. Uncertainty data per ISO/IEC 17025 is supplied standard. The DFS may be specified with or without our NEXYGEN DF Series software.

• Normal Tensile and Compression Measurement
• Peak Tension and Compression Measurement
• Sharp and % Break Detection
• Contact Closure
• Pass-Fail Limits
• High & Low Setpoint Limits
• Load Average
• Time Average
• Load Comparison
• Statistical Calculations

The Ametek/Chatillon® DFE Series is a compact, easy-to-use force gauge designed for economy applications without compromising functionality. Ideal for handheld or test stand applications, the DFE is available with capacities from 2 lbf (1 kgf, 10 N) to 500 lbf (250 kgf, 2500 N). The DFE features an integral loadcell with a measurement accuracy of better than 0.25% full scale. A large, easy-to-read, high resolution dot matrix LCD display supports a variety of standard gauge functions including normal and peak readings, high/low limits, setpoints, pass/fail results, statistical results, loadcell actuation and direction. Loads are displayed in ozf, gf, lbf, kgf and N units. The display can be inverted and displayed results may be “hidden” from the operator. The DFE gauge may be specified with or without RS232 serial communication. All DFE Series force gauges come with a carrying case, battery adapter/charger, testing accessories and NIST Certificate of Calibration with data. Uncertainty data per ISO/IEC 17025 is supplied standard.

• Normal Tensile and Compression Measurement
• Peak Tension and Compression Measurement * Pass-Fail Limits
• High & Low Setpoint Limits
• Statistical Calculations

Our NEXYGEN GAUGE software lets you expand the power and performance of your Chatillon gauge. You can create graphical and tabular test results from data supplied by your gauge.

Results may be color coded for immediate recognition. You can specify units, fonts, titles and output your results to WORD, EXEL, ACCESS or OLE2 compatible documents. Perform automatic pre- and post-test routines. So easy, with one keypress, your testing and analysis is complete.

• Pull to Break - Pull to Limit
• Compress to Rupture
• Compress to Limit
• Torque to Break
• Torque to Limit

The Chatillon® LTCM-100 Series motorized tester, combined with a Chatillon gauge, is perfect for applications requiring an economical solution to tensile or compression testing. The LTCM-100 motorized test stand has a large workarea making it ideal for production environment or applications with large test samples. Crosshead movement is operator controlled using a switch that can be set to move the crosshead up or down at a specified speed. Speed is user-selectable. Positive braking and high and low limits are standard.

The Chatillon® LTCM-500 Series motorized tester, combined with a Chatillon gauge, is perfect for applications requiring an economical solution to tensile or compression testing up to 550 lbf (2500N). A large working are and 5-inch (130mm) throat and long 29.5-inch (750mm) travel is ideal for tensile, compression, flexural, shear and peel testing. Tester includes mechanical and digital load limits that can be used to control crosshead movement, e.g. stop the crosshead when a load limit is achieved. An innovative T-Slot work surface ensures proper centerline alignment and fast fixture setup. An optional expanded work table is ideal for very large samples with diameters over 10-inches (250mm). Controls are simple and intuitive making it ideal for production environments. An optional footswitch can be used for "hands-free operation" and used to control crosshead movement. An optional splinter shield is also available.

The Chatillon® TCD225 Series is an advanced force testing system optimized for production, quality control and engineering applications. The TCD System consists of a powerful, yet easy-to-use console; a rugged frame with high performance, closed-loop motion control; and an intelligent load sensing system with measuring accuracies better than 0.1% full scale. The TCD console features a high resolution color graphical display featuring menus, function and numeric keys and status indicators that assist the user in setup, operation and analysis. Information may be displayed in large-format tabular and graphical formats for easy viewing. The frame operates from 0.001 to 50.0-inches per minute (0.01 to 1270 mm/minute) and employs an advanced closed-loop PID controller for precision travel (accuracy better than 0.25% unloaded), ideal for applications such as spring testing where exact distance control is required. The TCD System permits the user to measure heights based on a datum or absolute position. Deflection compensation is standard. Standard test setups for load limits, distance limits, time limits, break tests, rupture tests, cycling and loop tests are included. No Computers. No Software. No Compromises.

Advanced, Simple to Use Test Setups that You Create Graphically
- Limit Testing (Load, Distance, Time)
- Break & Rupture Testing
- Cyclic & Loop Testing (Time or Count)
- Multi-Stage/User Defined Testing per ISO and ASTM Specifications
- Open Architecture Does not require computers or proprietary software applications!
- Use for Height Measurement
- Ideal for Accurate Spring Testing

Advanced Operator Interface based on Metronics Gage Chek Architecture
- Simple Operation with Templates, Menus & Prompts
- Tabular & Graphical Results including embedded SPC
- Multiple Display Languages- English, Spanish, Portuguese, French, German, Italian, Chinese (Simplified), Chinese (Traditional), Korean, Russian, Turkish, and more

Data Acquisition at full 1000 Samples per Second (user-selectable to 1to 1000Hz)
- Save Data to USB Drive
- Direct Import into Excel or other OLE2 Compatible Applications

Ultimate Security
- Save Tests and Operate from USB Flash Drive
- Create Tests and Upload into Production Machines
- Use Bar Code Scanner to Automatically Call a Test for the Authorized User
- Save and Transfer Raw Data, Results, Test Setups using USB Flash Drive

The Chatillon® TCD110 Series is an advanced force testing system optimized for production, quality control and engineering applications. It is a smaller capacity machine compared to the new TCD225 System or TCD1100 System. The TCD System consists of a powerful, yet easy-to-use console; a rugged frame with high performance, closed-loop motion control; and an intelligent load sensing system with measuring accuracies better than 0.1% full scale. The TCD console features a high resolution color graphical display featuring menus, function and numeric keys and status indicators that assist the user in setup, operation and analysis. Information may be displayed in large-format tabular and graphical formats for easy viewing. The frame operates from 0.001 to 20.0-inches per minute (0.02 to 510 mm/minute) and employs an advanced closed-loop PID controller for precision travel (accuracy better than 0.25% unloaded), ideal for applications such as spring testing where exact distance control is required. The TCD System permits the user to measure heights based on a datum or absolute position. Deflection compensation is standard. Standard test setups for load limits, distance limits, time limits, break tests, rupture tests, cycling and loop tests are included. No Computers. No Software. No Compromises.

Advanced, Simple to Use Test Setups that You Create Graphically
- Limit Testing (Load, Distance, Time)
- Break & Rupture Testing
- Cyclic & Loop Testing (Time or Count)
- Multi-Stage/User Defined Testing per ISO and ASTM Specifications
- Open Architecture Does not require computers or proprietary software applications!

Use for Height Measurement
- Ideal for Accurate Spring Testing

Advanced Operator Interface based on Metronics Gage Chek Architecture
- Simple Operation with Templates, Menus & Prompts
- Tabular & Graphical Results including embedded SPC
- Multiple Display Languages- English, Spanish, Portuguese, French, German, Italian, Chinese (Simplified), Chinese (Traditional), Korean, Russian, Turkish, and more

Data Acquisition at full 1000 Samples per Second (user-selectable to 1to 1000Hz)
- Save Data to USB Drive
- Direct Import into Excel or other OLE2 Compatible Applications

Ultimate Security
- Save Tests and Operate from USB Flash Drive
- Create Tests and Upload into Production Machines
- Use Bar Code Scanner to Automatically Call a Test for the Authorized User
- Save and Transfer Raw Data, Results, Test Setups using USB Flash Drive

- Measurement Accuracy: Better than 0.1% Full Scale
- Speed: 0.001 to 20 in/min (0.02 to 510 mm/min)
- Independent Speeds for all stages within a Test Setup

The Chatillon® TCD1100 Series is an advanced force testing system optimized for production, quality control and engineering applications. The TCD System consists of a powerful, yet easy-to-use console; a rugged frame with high performance, closed-loop motion control; and an intelligent load sensing system with measuring accuracies better than 0.1% full scale. The TCD console features a high resolution color graphical display featuring menus, function and numeric keys and status indicators that assist the user in setup, operation and analysis. Information may be displayed in large-format tabular and graphical formats for easy viewing. The frame operates from 0.001 to 40.0-inches per minute (0.02 to 1015 mm/minute) and employs an advanced closed-loop PID controller for precision travel (accuracy better than 0.25% unloaded), ideal for applications such as spring testing where exact distance control is required. The TCD System permits the user to measure heights based on a datum or absolute position. Deflection compensation is standard. Standard test setups for load limits, distance limits, time limits, break tests, rupture tests, cycling and loop tests are included. No Computers. No Software. No Compromises.

Advanced, Simple to Use Test Setups that You Create Graphically
- Limit Testing (Load, Distance, Time)
- Break & Rupture Testing
- Cyclic & Loop Testing (Time or Count)
- Multi-Stage/User Defined Testing per ISO and ASTM Specifications
- Open Architecture Does not require computers or proprietary software applications!

Use for Height Measurement
- Ideal for Accurate Spring Testing

Advanced Operator Interface based on Metronics Gage Chek Architecture
- Simple Operation with Templates, Menus & Prompts
- Tabular & Graphical Results including embedded SPC
- Multiple Display Languages- English, Spanish, Portuguese, French, German, Italian, Chinese (Simplified), Chinese (Traditional), Korean, Russian, Turkish, and more

Data Acquisition at full 1000 Samples per Second (user-selectable to 1to 1000Hz)
- Save Data to USB Drive
- Direct Import into Excel or other OLE2 Compatible Applications

Ultimate Security
- Save Tests and Operate from USB Flash Drive
- Create Tests and Upload into Production Machines
- Use Bar Code Scanner to Automatically Call a Test for the Authorized User
- Save and Transfer Raw Data, Results, Test Setups using USB Flash Drive

- Measurement Accuracy: Better than 0.1% Full Scale
- Speed: 0.001 to 40 in/min (0.02 to 1015mm/min)
- Independent Speeds for all stages within a Test Setup

Incredibly durable and user-friendly, our economical mechanical gauges are excellent for repetitive testing in assembly line or quality control lab applications. The peak mode features an easy push-button reset; this is especially helpful for doing repetitive testing in an assembly line or quality control lab. The real time mode allows you to see force changes as they occur.

Ergonomically designed for handheld use, both gauges may be used with the optional handle (great for loads over 15 pounds). Response time is immediate. Large, easy to read dial indicators are designed to reduce gauge parallax.

Microprocessor-controlled, the DFS series represents a unique approach to force testing. Designed to be handheld or stand mounted, the DFS features many advanced functions typically included on gauges costing twice as much. Intelligent and versatile, these high performance gauges are easily user configured for sampling and display update rate, units of measure, baud rate, data output stream, memory type and high and low set points. Large memory capacity (100 samples) and on board statistical processing allows the DFS series to operate with or without computer control. Additionally, each gauge possesses three types of signal outputs for data collection and function analysis. One year warranty.